Furnace Repair Service in Garland TX (Maintenance & Replacement )

Regular Furnace Tune-Up

Like many other systems, your furnace needs to be regularly checked by a professional if you want it to run efficiently through its life span. During a check-up, our technician will be able to defect and solve minor problems. Before they escape into larger, more dangerous, and more costly ones. Usually, furnaces need tune-ups every year. However, you may only need to do it every two or even three years. If you have a newer furnace, your home is very clean, you have no pets, or your furnace is not used that much because you live in a temperate climate. Conversely, you might want to have your system checked up more frequently if you have old equipment, you have pets, or your furnace is used a lot because of the climate you live in.

What Does a Furnace Check-Up Consist Of?

1. Cleaning components of the furnace. For example,  the heat exchanger, combustion chamber, burners, jets, blower motor and fan, and others.    
2. Checking and clearing the condensate lines, which not only water generated from gas combustion. They also drain condensation that collects on the A/C coil above the furnace.                      
3. Doing a temperature differential test, which is done by measuring the temperature of the air going into and leaving the furnace.                            
4. Checking levels of O2, CO, and CO2 in the exhaust going out of the furnace.                                                   
5. Checking the igniter and flame sensor for wear.

Why Choose Aircons?

• Certified & Experienced Team
• 100% Guarantee on all work
• Continued support
• Free estimates and competitive pricing
• A+ rating with satisfaction
• Local & family-owned business

Additional Repair Service & Help

While the technician is there, you can ask them for advice on which filter you should be using. Depending on your lifestyle, health conditions, the type of furnace you own, and some other factors. It could be the case that you are using a filter that is too fine or too porous for the furnace to operate efficiently and simply is not doing a good job of filtering the air to the furnace and your home. Choosing the right filter for your needs is extremely important for your furnace to work efficiently and thus our technicians will always be happy to give you advice on this matter.

Our services are based on Garland TX and its Surrounding areas (Rowlett  TX, Sachse TX, Richardson TX, Plano TX, Wylie TX, University Park, TX, Mesquite TX, Highland Park, TX, Rockwall TX, Dallas TX, Allen TX ), we can help you! Dynamically driven, we prioritize delivering thorough heating repair services, carried out by our expert team. Our cost-effective packages demonstrate our passion for offering the best possible service to our customers.

Furnace Troubleshooting

Before hiring a professional to repair your heating system, you can check a few things by yourself. Because the Furnace problem might turn out to be something you can fix yourself. Look at the following:

1. If the furnace or heat pump has stopped working completely, make sure a circuit breaker has not tripped. It has, turns the switch totally off then flip it into the same position as all the other switches. If that is not the problem, look at the thermostat is it set to “heat” and is the setting above the temperature in the room? Maybe an on-off switch inadvertently has been switched off?                                                                                                                  
2. If the furnace repair issue involves insufficient heating in one or more rooms, the reason may be that the air filter has been clogged. Make sure that nothing is blocking heating registers throughout your home. Because it is quite common to throw rugs, furniture, or drapes in the home to block registers. Maybe you have noticed signs that your ductwork is dirty or clogged (dust devils blowing out of vents, visible mold, signs of insects or rodents)? This can also be a reason for your furnace problems.                                                                                                                            
3. If you have a problem with unbalanced heating or cooling that has been going on for a while and from one part or floor of the house to another. The problem could be that you are expecting too much out of a single thermostat, which might not be enough to appropriately manage to heat your entire house. In many larger or multi-level homes which are served by a single thermostat, some parts of the house (for example a finished basement or a loft bedroom) will be difficult to keep at a comfortable temperature. In that case, the problem might not even be with the furnace and you should consider installing a zoning system, as an alternative to using space heaters or room ACs.

Maintenance & Replacement Schedule

If troubleshooting doesn’t fix your furnace problems, please call us at (469) 388-0234 Aircons Heat & Better Air! We will respond rapidly to your request and send a skilled Certified technician to your home. They will discuss details of the problem with you and inspect your furnace heating system. That may result in solving the problem right away. If that is not the case, a diagnostic test will be performed in order to find out what is wrong. The problem will be explained to you completely and understandably, and you will be provided with a quote, and once you’ve given the go-ahead, your furnace will be repaired promptly and reliably.

If the furnace problem is major, our Professional technician will provide an estimate on the furnace repair, along with information on estimated completion time and other important details. If you have an older system that is nearing the end of its service life, the expert technician will be happy to discuss a system upgrade.  As you can see, we offer a holistic service to make sure that our customers are always happy and that their furnace will function without interruptions.